27 一旦墙体经过板条固定,应遵循Weathertex产品的特定标准固定说明将覆层安装在框架上。在安装Weathertex Primelok外墙板的情况 下,Weathertex Primelok Starter Strip可以省略,因为大口径空腔闭合器的边缘可能用于铺设第一块木板。 将Weathertex安装在空腔系统上 9.5mm Cavity Batten Selflok Ensure required ground clearance is maintained (refer to general requirements ) Note 1 Battens on Noggins for Architectural Panels Selflok Timber Frame Large Cavity Closer Primelok Small Cavity Closer 9.5mm Cavity Batten 9.5mm Cavity Batten Primelok 9.5mm Cavity Batten Step 1 Install vapour permeable Step 3 Install 9.5 Weathertex Cavity Batterns on Stud Step 2 Install Cavity Closer * See Details Step 4 Install Weathertex as per Standard Instructions